The tree is a valuable resource that provides many benefits to living beings. But when it is suffering, it grows faster than its peers, poses safety problems, and you can only cut it down. This operation requires both consideration and caution. Therefore, it is important that when cutting down a tree, you adopt the right reflexes and equip yourself with a high-quality device. However, how do you go about it? The rest of this article reveals the secrets.
Choose the right machine for the task
There are plenty of circumstances in which cutting down a tree is necessary. For this reason, to do a good job, you need to find the ideal tool, a powerful one that can handle this dangerous activity. Without worrying, explore tronconneuse.xyz to choose the machine to safely cut down the tree. If you already have a chainsaw but it is in poor condition, then it is unnecessary to spend money again. Instead, you just need to stock up on spare parts from sites dedicated to this task. Finally, note that opting for spare parts is an environmentally friendly and economical action.
Recommended read : How to buy a good exercise bike?
Phases to follow for cutting down a tree
Since you have a chainsaw, now is the time to learn how to use it to calmly cut down a tree. First, you need to make a notch in the tree. For this phase, you should choose the side that will indicate the direction of the tree’s fall. Depending on the diameter of the tree trunk, you should cut from top to bottom to a depth of ⅓ to ¼. Additionally, make at least one diagonal cut at a 45° angle, as it is difficult to cut directly at ground level. Then, you can make a horizontal notch according to the saw line to connect it to the first one. After that, remove the wedge of wood that has formed, known as the notch.
Next, you will make the felling cut, also known as the falling cut. You need to make this falling cut opposite to the notch. It should be positioned 3 cm higher than the second cut of the notch without reaching it. Note that gradually, the falling cut resembles the notch, and the tree tilts forward. At this point, it is advisable to stop cutting and maintain a distance to allow the tree to fall. Afterward, you will perform limbing the tree, which should be done when it is flat. This involves removing all the branches from the tree with the chainsaw. However, it is recommended to start with the smaller branches and finish with the larger ones. For your information, the operation of cutting down a tree takes between 60 to 120 minutes with the chainsaw. But if you do not follow these steps, it may take you longer.
Further reading : How to Cut Straight with a Circular Saw
How to protect yourself from all risks?
Still aiming to cut down a tree safely and successfully, you must take certain precautions. Among other things, pay particular attention to your surroundings. This is to ensure that the fall will not cause any obstructions. Clear an area that can give you a distance multiple of the height of the tree. Next, you should inform your neighbors about the execution of this operation and ensure that no one enters the cleared perimeter during the felling. Additionally, you need to equip yourself with personal protective equipment such as safety shoes, goggles, gloves, hard hats, etc.